How to Set up Wireless SV3C IP Camera from Amazon!

PLEASE: THE CAMERAS FIRMWARE MAY DIFFER FROM THIS INSTALLATION! This is also a quick start guide and is designed to get your camera running quickly.

Set Up Camera using INTERNET CABLE:

Step 1: Connect the power cable to your outlet.

Step 2: Connect the UDP or Ethernet cable to the cable and router.

Go to Set Up Camera to Network to continue!

Set Up Camera using Access Point Mode:

Step 1: Connect the power cable to your outlet.

Step 2: Attach the included antenna.

Step 3: Connect to your cameras WiFi network. Check your user manual to see password EXAMPLE: IPCAM-XXXXX

Section 2: Set up camera to Network:

Step 4: Download CamHi app and open it.

Step 5: Press add camera then press search camera.

Step 6: Click your camera and name it then press save.

IMPORTANT! Secure your Camera, I AM NOT RESPONSIBLE FOR HACKERS HACKING INTO YOUR CAMERA!

Default username and Password: admin

Step 7: Open CamHi app and press your cameras setting icon.

Step 8: Press change password and set your password then save.

Step 9: Your phone will disconnect from camera and will say wrong password.

Step 10: Press the edit button at the top right corner to edit your cameras username and password.

Step 11: Click your camera and put in the new username and password then press save.

View camera via Computer (Use internet explorer for best functionality):

Step 12: Log in to your router’s login page. The address might be this: http://192.168.1.1

Step 12: Go to a Client IP Table or it could be connected devices section.

Step 13: Find your IP cameras IP address and type it into the search bar.

Step 14: Enter your new password and username, If you didn’t change username and password, please type in admin for both username and password.

Step 15: Install the active X plugin.

Step 16: Refresh page when done install then press allow and you will see camera live feed.

That is how you install the camera!